70m Self Supporting Lattice Steel Tower 4 Legged Telecommunication Tower
1. Production decription
This Type of lattice steel tower is very popular .Its prameters can be suppiled for reference as following :
Height : 5-120m
Material : Q345B/A572,Grade 50/S355JR,minimum yield strength>=345N/mm2
Q235B/A36/S235JR,minimum yield strength>=235N/mm2
Design detail: Cable and ladder inside or outside
Working &Resting Platform: 1~3
Antenna Support: 3-18
Microwave Dish: 3-18
Surface treatment Hot dip galvanized according to ASTM A 123,
Color painting :epoxy paint 100 microns or as requirment
2. Product capacity
We have 5 production line for manufacturing lattice steel towers ,We can supply 3000 tons steel towers
per month .And we have enough room to place more steel towers production line if needed .
| Numbers of angle production line | 5 |
| production capacity per month | 3000 tons |
3. Technical support
Our engineer and drawer has lots of designing ,lofting experience of lattice steel towers .
Which we can supply a overall solution of all the towers .
| Service you can get from our engineer | tower design,tower lofting ,tower weight calculation and loading plans |
| Software they used | TTA,STWXP,TMA,LMA,Daoheng |
4. Quality control
We have very strict quality control in every lattice steel towers .
Material incoming control:chemical and physical test
Zinc coating thinknes inspection
5. Trial assembly
We usually has two ways of trial assembly for lattice steel towers : trial assembly before galvanzation
and after galvanization
6. Hot dip galvanization and painting
7. Package and delivery
Package we usually do as our clients requirment .Usually for lattice steel towers,we fixed angle steel by
steel wire to bundles and use special material to protect zinc .
For fasteners ,we use bucket ,bag or box.
8. Product catalogue:
Product Tags:
|
|
70m Self Supporting Lattice Tower , Telecommunication Lattice Cell Phone Tower Images
|
